The process of using integrated sewage treatment equipment

        Integrated sewage treatment equipment is an indispensable device in our normal life. It has powerful functions and can effectively treat sewage, achieving the effect of secondary utilization. The process of integrated sewage treatment equipment is very concerning. Below, we will talk about the operation process of integrated sewage treatment equipment. Take water from the circulating water return pipeline, let the circulating water enter the filter through the operating inlet pipe according to the specified test flow rate, pass through the inlet of the filter and the unique top water distributor to ensure uniform distribution of water pressure and flow, and flow through the filter medium layer inside the tank. After being filtered by the ultra-fine particle medium filter layer of the filter, it flows out through the horizontal outlet device at the bottom and the operating outlet pipe of the filter before entering the circulating water tank. When the filter runs for a certain period of time or reaches a certain pressure difference, the filter automatically enters backwashing. The circulating water filtered by other filters enters the ultrafine particle medium filter in the opposite direction through the outlet pipe of the ultrafine particle medium filter, and enters the filter through the transverse outlet device at the bottom of the filter. The reverse flow direction flows through the filter medium layer inside the tank, causing the filter material to boil. Under hydraulic action, solid impurities on the surface of the filter material are washed out. The backwash effect can be observed by the backwash observation valve, and the backwash intensity can also be achieved by adjusting the backwash drainage volume through the backwash observation valve.